Imagine the look on your driveway: a huge, ugly crack in the middle, worn out surface, and several tiny potholes. If this is the situation on your driveway, it is time to engage reliable companies for asphalt driveways Melbourne has to offer.

Experts advise that you should repair smaller cracks on your driveway, earlier before they can turn into big holes that may be costly to repair. If you are like some homeowners, you may think of repairing your asphalt driveway without involving an expert. However, much as this step may save you some few dollars, you may lack adequate knowledge to do it to standard. What is the point of going the DIY way then you face the same problem in just a few months? For homeowners in Melbourne, it is always advisable to consult certified companies for asphalt driveways Melbourne area has to offer.

The following steps are necessary for ensuring that your driveway is free from cracks and potholesĀ if you choose to do it yourself:

Preparation

First off, you need to prepare the surface well for the application of asphalt. Take care during the preparation not to make the cracks deeper than they already are. You just need to clean the edges and remove the debris that may prevent proper sealing.

During preparation, you can use a chisel to remove the jagged edges to make the crack in shape. Use a wire brush to remove the debris and a compressed air to remove the tiny particles in the crack. With these steps, you will have a clean crack in the end.

The actual repair process

Experts for asphalt driveways Melbourne area has to offer to advise that regular sealing can help you save money in the long-term. For example, if you delay the sealing process, the potholes can become bigger, to an extent that you have to replace the entire driveway surface. This can be more expensive than sealing tiny cracks on the surface of the driveway.

For smaller cracks, the process is similar to that of repairing cracks on a concrete surface. The main difference is that you will use asphalt-based filler. The area to be filled must be dry before the actual application of the filler. For bigger cracks, however, crushed gravel is required to form the base before filler is applied. The asphalt compound should fill the last two inches to the surface of the driveway.

Find professional help

From reliable companies for commercial asphalt services Melbourne has to offer, you can get adequate resources and information to guide you through the repair process. Reliable asphalt contractors in Melbourne can also help you with asphalt driveway Melbourne cost comparison, so you are able to engage a certified company with affordable charges. For example, in Australia, you can try visitingĀ http://www.asphaltmelbourne.com.au/asphalt-driveways-melbourne for more information on asphalt services.

Common causes of driveway cracks include water seeping through the cracks into the base, which eventually leads to swelling of the surface. Other causes are heavy traffic and poor workmanship. Overall, you can save your driveway from such problems by involving a professional asphalt contractor.

Leave a Reply

Your email address will not be published. Required fields are marked *

Copyright © 2015 Pixel Theme Studio. All rights reserved.